Toshiba Pocket Pc e830 - Manual (Page 120)

Toshiba Pocket PC e830 User’s Guide
120
Configuring the Network Authentication
screen
A wireless network can be added either when the network is detected or
manually by entering settings information. To determine if authentication
Information is needed, see your network administrator.
• Authentication
Tap to select the authentication method.
• Data Encryption (WEP/TKIP Enabled)
Tap to select the encryption method.
• The Key is provided for me automatically
Select if you can obtain WEP key automatically from the Access Point
(AP). In most cases, this function is used with 802.1X function. Default
is Enable.
• Network Key (WEP/Pre-Shared Key)
Enter the ASCII characters and symbols that correspond to the mode
selected.
■ 64 bits (ASCII)
5-digit ASCII characters or symbols can be entered in Network
Key.
■ 128 bits (ASCII)
13-digit ASCII characters or symbols can be entered in Network
Key.
■ 64 bits (HEX)
Hexadecimal 10-digit English letters and numerals can be
entered in Network Key. Letters and numerals that can be
entered are 0-9 and A(a) - F(f).