Using com service, Establishing an activesync connection with a pc, Preparing for connection – Toshiba Pocket Pc e830 User Manual
Page 152
Toshiba Pocket PC e830 User’s Guide
152
Using COM service
Establishing an ActiveSync connection with a PC
Preparing for connection
■
The PC to which you want to connect must be Bluetooth enabled and
have ActiveSync installed. Your Toshiba Pocket PC e830W must also
have been synchronized with the PC using a cradle or a cable at least
once to establish a “partnership” with the PC.
1.
From the service list on the Bluetooth Settings screen, tap and hold
on the name of the COM service to which you want to connect, then
tap ActiveSync Registration or Connection Registration on the
pop-up menu. After this selection, an optional screen appears.
If you select ActiveSync Auto Connect, ActiveSync is performed
automatically and continuously. When the connection registration is
complete, your Toshiba Pocket PC e830W and service icons change
to registered connection icons.
2.
Tap OK.
The screen closes and the Today screen appears.
3.
From the PC, set the port to be used when you are connecting with
Bluetooth.
The PC is now ready to connect. This operation may vary depending
on the PC. Please refer to the user's guide supplied with your PC for
more information.
4.
Tap Start, Programs, Bluetooth, then Bluetooth Connection.
Your Toshiba Pocket PC e830W connects to your PC.
When the connection is complete, the Programs screen appears.