Toshiba Pocket Pc e830 - Manual (Page 43)

Chapter 2: Basic Skills
43
Removing a CF Type II card
1. Turn off the power.
2. Lightly press down the release button with the stylus. The button
pops out. Press down on the release button again. The card with-
draws slightly from the slot.
3. Pull the card straight up to remove.
Inserting an SD Card
You can use a Secure Digital Card (SD) to store data created on your
Toshiba Pocket PC e830.
1.
Turn off the power.
2. Remove the dummy card.
3. Insert the card with its contact surface (metal contact surface) facing
the back of your Toshiba Pocket PC e830.
4. Press down on the card until it clicks into place.
Use the stylus to release the CF Type II card. NOTE