Toshiba Pocket Pc e830 - Manual (Page 149)

Chapter 10: Bluetooth
149
Advanced Settings
To change an advanced setting, select the desired setting and tap OK.
The default settings are as follows.
■ In the default setting for Home, the Security Mode is set to Non-secure
and, therefore, unspecified devices may be able to connect to Local
Device. It is recommended that you set the Security Mode to Security
On.
■ If you want to set the Connectability Mode to Non-connectable and
you are operating your Toshiba Pocket PC e830W in an environment
in which there are three or more operating Bluetooth devices, you
should also set the Discoverability Mode to Non-discoverable.
4. Tap the Options menu, then Local Device.
The Device Information screen for Local Device appears.
To change the name of the device, enter the new name in the Device
Name box and tap OK.
■ The default device name is “Toshiba BT.”
■ The device name can be a maximum of 248 alphanumeric characters.
■ If the device name exceeds 248 alphanumeric characters, an error
message appears.
The Bluetooth environmental settings are now complete. Refer to the fol-
lowing for additional operations.
■ COM service, see "Using COM service" on page 152.
■ DUN/LAP service, see "Using DUN/LAP service" on page 153.
■ PAN service, see "Using PAN service" on page 154.
■ OPP service, see "Using OPP service" on page 156.
■ FTP service, see "Using FTP service" on page 159.
Discoverability
Mode
Connectability
Mode
Security Mode Encryption
Office Discoverable Connectable Security On Yes
Mobile Non-discoverable Non-connectable Security On Yes
Home Discoverable Connectable Non-secure No
Other Discoverable Connectable Security On Yes