Toshiba Pocket Pc e830 User Manual

Page 213

Advertising
background image

Chapter 12: Additional Information

213

The retrieved information contains invalid data.
Cause

The device information contains invalid data.

Solution

Display the device list again or update the device information
with the remote device search.

Unable to delete remote device due to insufficient memory. Check
the amount of available memory.
Cause

There is insufficient memory to delete the device.

Solution

Increase the amount of available memory and then try to delete
the device again.

Service list search failed due to insufficient memory. Check the
amount of available memory.
Solution

Increase the amount of available memory and then try the ser-
vice list search again.

The maximum number of services (30) has been exceeded.
Cause

Your Toshiba Pocket PC e830 has detected more than its max-
imum number of services (30).

Solution

Have the remote device delete unneeded services, and then
update the service list.

Unable to successfully connect. Check the status.
Cause

An error occurred while trying to connect to a device or service.

Solution

Check the status of the device or service and try connecting
again.

Unable to successfully disconnect. Check the status.
Cause

An error occurred while trying to disconnect from a device or
service.

Solution

Reset your Toshiba Pocket PC e830.

Unable to update service information.
Cause

An error occurred while trying to update the service informa-
tion.
The passkey was not entered within the 20-second time limit
and, as a result, the program timed out.
An incorrect passkey was entered.
There are no available services.

Solution

Try updating the service information again.

The Bluetooth authentication failed. Please retry to enter the correct
Bluetooth passkey (PIN Code).
Cause

An error occurred while trying to update the service informa-
tion.
The passkey was not entered within the 20-second time limit
and, as a result, the program timed out.
An incorrect passkey was entered.

Solution Try updating the service information again with correct pass-

key.

Advertising