Defining the action for a user command, Defining text for the command, Assigning a program to the command – Toshiba Pocket Pc e830 User Manual
Page 196: 196 defining the action for a user command
Advertising
![background image](/manuals/24227/196/background.png)
Toshiba Pocket PC e830 User’s Guide
196
Defining the action for a User Command
To define an action, tap User Command tab within the Voice Command
Settings screen.
Defining text for the command
1.
Tap and hold the command insert text xxx, then select Edit.
2.
Input the text you want to define within the text area. For example,
input “Thank you for your email about “. Tap OK.
Assigning a program to the command
1.
Tap and hold the command run program xxx, then select Edit.
2.
Select the application you want to assign by tapping the Browse.
3.
Tap OK.
You can only clear the action for the command; the com-
mand is not deleted.
Tap to clear the action that you
defined for the command.
NOTE
Advertising