Toshiba Pocket Pc e830 - Manual (Page 41)

Chapter 2: Basic Skills
41
Initial setup and touch screen correction
When using your Toshiba Pocket PC e830 for the first time, follow the ini-
tial setup procedures below, after the battery has been charged. When
you move the battery switch to the “supply” position, your Toshiba Pocket
PC e830 powers on automatically and the Welcome screen appears. Tap
the screen to start the following setup.
1.
Complete the touch screen correction.
When the align screen appears, tap the center of the cross target
with the stylus. The next target position changes upon tapping the
target. Five taps completes the positioning correction. The screen
then changes to the Stylus screen.
■ If an object touches the screen during correction, the correction is
cancelled. Repeat the correction procedure.
2. Follow the onscreen instructions describing how to use the stylus,
then tap NEXT.
3. Follow the pop-up menu instructions.
■ Read the on-screen explanation and then follow the instructions.
Display the pop-up menu, then cut and paste the data according
to the screen instructions.
■ After you finish the paste operation, tap NEXT.
4. Set the TIME ZONE.
■ When tapping the right mark, the city and the time zone lists
appear. Tap the desired city and time zone.
For more information on stylus operation, See "Using the
Stylus" on page 33. NOTE