Bosch GTM 12 JL Professional - Manual (Page 49)

English | 49
Bosch Power Tools 1 609 92A 0BP | (9.7.13)
– Hold the respective position of each set screw and tighten
all screws 71 again. (see figure I5)
If the parallel guide can no longer be firmly attached onto the
saw table after aligning, reset the tensioning force of the guide
69. (see “Adjusting the Tension Force of the Parallel Guide”,
page 48)
Maintenance and Service
Maintenance and Cleaning
 Before any work on the machine itself, pull the mains
plug.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Cleaning
For safe and proper working, always keep the power tool and
its ventilation slots clean.
The retracting blade guard must always be able to move freely
and retract automatically. Therefore, always keep the area
around the retracting blade guard clean.
Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.
Clean the lighting and laser unit (33, 19) regularly.
To clean the laser lens cover 16, completely unscrew the
screw. Afterwards, pull the cover out of the casing alongside
the retracting blade guard 20. (see figure h)
Accessories
After-sales Service and Application Service
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: [email protected]
Article number
Material clamp 1 619 PA4 166
Insert plate 1 619 PA4 167
Dust bag 1 619 PA4 560
Saw blades for wood and plate materials, panels and
strips/mouldings
Saw blade 305 x 30 mm, 40 teeth 2 608 640 440
Saw blades for aluminium
(Operation as Chop and Mitre Saw)
Saw blade 305 x 30 mm, 96 teeth 2 608 640 453
OBJ_BUCH-1688-004.book Page 49 Tuesday, July 9, 2013 11:59 AM