AASTRA 630d for Aastra IntelliGate User Guide EN - Manual (Page 31)

Supplementary features
Aastra 630d 31
e
u
d
-10
95
/1
.0
–
I7
.8
–
07
.2
0
0
9
■ Receiving an Announcement
After an attention tone you will be addressed via your loudspeaker.
You can listen to the announcement or stop it.
■ Private call with PIN
You want to make a private call on your phone or on a third-party phone.
With the aid of your PIN you can use any phone to make an external call with your own personal
settings, even if that phone is locked for external calls. The called party's display shows your
personal phone number and not the number of the phone from which you are making your
call. Any call charges incurred will be charged to you.
The call number dialled is not stored in the last-number redial list.
<Phone number>
Announcement
Enter the call number and press the Announcement softkey.
➔ The call number is displayed.
Note:
You can also find the call number of the user you want in the phone book or in
a call list.
OK Confirm with the Ok softkey.
➔ User is made aware of the announcement by an acoustic signal. The display
shows
Announcement: You can now talk.
Or:
You can also start the announcement using Menu > Call features > Announce-
ment .
To continue the announcement as a phone call:
Press the Call key.
➔ You are now connected to the person who initiated the announcement.
To stop the announcement:
Press the End key.
<Setting value> 1. Enter the */# procedure #46 followed by your internal call number.
2. Enter your PIN.
3. Enter the external call number directly, without the exchange access digit.
Press the Call key.
➔ The phone is now enabled. The external user is called.
Note:
The factory setting "0000" is not accepted. First change the PIN as described in
chapter
"Changing the PIN" , page 52 or use the */# procedure *47 (see "User’s
Guide */# Procedures"). If you have forgotten your PIN, your system administra-
tor can reset it to the factory setting.
eud-1095_en.book Page 31 Monday, July 13, 2009 1:56 PM