AASTRA 630d for Aastra IntelliGate User Guide EN - Manual (Page 41)

Supplementary features
Aastra 630d 41
e
u
d
-10
95
/1
.0
–
I7
.8
–
07
.2
0
0
9
tory setting (all phones are ringing) is used as standard.
Setting functions by remote control
This section explains how you can change your phone's settings even if you are not directly at your
phone.
You are not at your desk and want to set various functions on your phone from a different
phone.
You can activate/deactivate many of your phone's functions by remote control from a different
phone.
The remote control is initiated using a special */# procedure. You can then enter the function
commands and */# procedures.
Activating personal call routing:
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
General
Scroll to General and press the Select softkey.
Pers. call routing
Scroll to Personal call routing and press the Select softkey.
<Setting value>
Select the call routing you want and confirm with the Select softkey.
➔ Personal call routing is activated.
Deactivating personal call routing:
Press Menu > Activated features > Reset .
<Setting value> Using remote control from a third-party phone:
1. Enter */# procedure #36.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the */# procedure for activating/deactivating the function you want.
Press the Call key.
➔ Acknowledgement tone sounds; function is activated/deactivated.
Note:
The factory setting "0000" is not accepted. First change the PIN as described in
chapter
"Changing the PIN" , page 52 or use the */# procedure *47 (see "User’s
Guide */# Procedures"). If you have forgotten your PIN, your system administra-
tor can reset it to the factory setting.
eud-1095_en.book Page 41 Monday, July 13, 2009 1:56 PM