AASTRA 630d for Aastra IntelliGate User Guide EN - Manual (Page 48)

Personalizing Your Phone
48 Aastra 630d
e
u
d
-10
95
/1
.0
–
I7
.8
–
07
.2
0
0
9
Adjusting the volume
All the ring tone properties are set using the profiles, see Chapter "Profile settings" , page 48 .
■ Setting the volume during a call
You want to adjust the volume while in a call. The handset and loudspeaker volumes need to be
set separately.
The new volume will remain stored even after the call is ended.
Profile settings
There are five different application profiles to adapt the phones to any given work situation, e.g.
headset or conference mode.
■ Setting up a profile
All your phone’s ringing properties are stored in the profiles.
Three default profiles are factory-set: Normal , Meeting , Charging bay . You can set up to 5 profiles.
A profile comprises a set of ringing and phone settings, which you can specify individually for
each profile. 1 profile is always active in telephone mode. The default profile is the
Normal pro-
file. Activate the appropriate profile depending on the situation (e. g. before a meeting you can
activate the
Meeting profile). The Charging bay profile is selected automatically whenever the
phone is placed in the charging bay.
You can set the following profile properties:
• Ring volume ,
• Ring melody for Internal ring , External ring and Discreet ring ,
• Vibracall , Discreet ring (phone only rings once), Suppress ring tone ( is displayed), Progres-
sive ring tone , Confirmation tone (each key stroke is confirmed with a beep), Battery warning
(battery nearly run-down triggers a warning).
LED display
Scroll to LED display and press the Select softkey.
<LED setting>
Scroll to the LED setting you want and confirm with the Select softkey.
Louder: Press top side key.
Quieter: Press bottom side key.
eud-1095_en.book Page 48 Monday, July 13, 2009 1:56 PM