Alarm – AASTRA 630d for Aastra IntelliGate User Guide EN User Manual
Page 67
Alarm
Aastra 630d
67
e
u
d
-10
95
/1
.0
–
I7
.8
–
07
.2
0
0
9
Configuring the no-movement, man-down and
escape alarm
■ Configuring the no-movement, man-down and escape alarm
You want to activate/deactivate the man-down, no-movement or escape alarm.
You can activate/deactivate the man-down, no-movement or escape alarm independently of
each other and set the
Detection duration
and
Sensitivity
(see chapter
, page
).
Press the navigation key to the right or the
Menu
softkey.
Settings
Scroll to
Settings
and press the
Select
softkey.
Sensor alarm
Scroll to
Sensor alarm
and press the
Select
softkey.
Man-down alarm
Activating/deactivating man-down alarm:
1. Scroll to
Man-down alarm
and press the
Select
softkey.
2. Scroll to
Activate
and press the
Select
softkey.
3. Scroll to
Detection duration
and set the duration for how long an alarm situ-
ation may occur until the pre-alarm is triggered.
➔
Alarm is activated/deactivated.
No-movement alarm
Activating/deactivating no-movement alarm:
1. Scroll to
No-movement alarm
and press the
Select
softkey.
2. Scroll to
Activate
and press the
Select
softkey.
3. Scroll to
Detection duration
and set the duration for how long an alarm situ-
ation may occur until the pre-alarm is triggered.
4. Scroll to
Sensitivity
and press the
Select
softkey.
5. Select the sensitivity level and press the
Select
softkey.
➔
Alarm is activated/deactivated.
Escape alarm
Activating/deactivating escape alarm:
1. Scroll to
Escape alarm
and press the
Select
softkey.
2. Scroll to
Activate
and press the
Select
softkey.
3. Scroll to
Detection duration
and set the duration for how long an alarm situ-
ation may occur until the pre-alarm is triggered.
4. Scroll to
Sensitivity
and press the
Select
softkey.
5. Select the sensitivity level and press the
Select
softkey.
➔
Alarm is activated/deactivated.
eud-1095_en.book Page 67 Monday, July 13, 2009 1:56 PM