AASTRA 630d for Aastra IntelliGate User Guide EN - Manual (Page 50)

Personalizing Your Phone
50 Aastra 630d
e
u
d
-10
95
/1
.0
–
I7
.8
–
07
.2
0
0
9
Hands-free and headset settings
This section explains other ways in which you can make calls with your phone.
■ Connecting a headset
Connect your headset to the socket on the bottom left-hand side of your phone. The headset
mode is then automatically activated.
Your phone also has a Bluetooth® interface (2.0) so you can operate the corresponding head-
sets. Only audio data can be transmitted via the Bluetooth® interface with a headset.
The opening of the headset connection is closed with a captive cover. If the headset is not in
use, please close the opening so the device can be used in accordance with its protection class.
Remove the cover by pulling it at the top edge of the housing. Never pull it at the bottom edge!
■ Activating headset operation
You have connected a headset and now want to activate the headset mode.
A headset can be connected in parallel with the handset.
If you answer a call in headset mode using the Call key or Loudspeaker key, the call is provided
on the headset.
This phone supports wireless headsets based on the DHSG standard, which allows you to set up
and to end calls from the headset. Ask your dealer which headsets are particularly well suited
for this phone.
When you connect a Bluetooth® headset (see chapter "Activating Bluetooth® mode and Blue-
tooth® devices" , page 51 ), the headset is automatically activated.
Note:
To find out how to phone with headset, refer to the Chapter "Using a Headset" , page 17 .
eud-1095_en.book Page 50 Monday, July 13, 2009 1:56 PM