Grain Systems Tanks PNEG-1912 - Manual (Page 38)

8. Optional BFT Ladder Assembly
38 PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series
Ladder Standoff Installation
With the sidewall ladder in place, standoff brackets must be installed on the ladder and attached to the
sidewall at each horizontal seam (every 32"). Start by assembling the standoff bracket and wedge to the
ladder rail as shown in
Figure 8K . Then, slide the standoff assembly along the ladder rail until the standoff
is in line with the pre-punched hole in the horizontal seam and attach to the sidewall using 5/16" x 3/4"
bin bolts.
Figure 8K