Safety cage hoop assembly – Grain Systems Tanks PNEG-1912 User Manual
Page 43
Advertising
9. Safety Cage
PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series
43
Safety Cage Hoop Assembly
To complete the safety cage hoop installation, some pre-assembly is required. Attach four (4) safety cage
brackets to the extension rails and two (2) safety cage brackets to the second 4' ladder section as shown
in
. See cage hoop bracket detail
for proper installation. Next, bolt each set of safety
cage hoop halves together using 5/16" x 3/4" bolts with the head of the bolt to the inside of the safety cage.
You may now bolt these assemblies to the safety cage brackets. Tighten bolts as you go.
Figure 9C
Advertising