Grain Systems Tanks PNEG-1912 - Manual (Page 55)

11. Hopper Assembly
PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series 55
Figure 11B
9' 60° Leg Attachment (for 9' 60° Tanks Only)
Curved washers are supplied in the hardware packages. These washers must be installed at the bottom
leg to sidewall bolt connection, to the inside of the hopper panel as shown in
Figure 11C .
Apply caulking between the hopper panel and the sidewall sheet.
Figure 11C
Hopper sheet to sidewall sheet