Grain Systems Tanks PNEG-1912 - Manual (Page 95)

15. Parts List
PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series 95
NOTE: Bolt listed first and nut second for each usage.
Hardware usage: Heads of bolts are on the outside of tank unless otherwise noted.
9' Diameter 45° Hopper Tank Hardware Specifications Parts List
Ref # Part # Description Qty
1 S-275
Bulk Tank Peak Ring to Roof Panels (Use 5/16" x 3/4" Hex Head Bin Bolts and
5/16" Hex Nuts.)
36
1 S-396 36
2 S-275
Roof Panel to Roof Panel (Use 5/16" x 3/4" Hex Head Bin Bolts and 5/16"
Hex Nuts.)
117
2 S-396 117
3 S-275
Roof Panels to Top Sidewall Sheets (Use 5/16" x 3/4" Hex Head Bin Bolts and
5/16" Hex Nuts.)
108
3 S-396 108
4 S-275
Vertical Sidewall Sheet Seams (Use 5/16" x 3/4" Hex Head Bin Bolts and
5/16" Hex Nuts.)
Varies
4 S-396 Varies
5 S-275
Horizontal Sidewall Sheet Seams (Use 5/16" x 3/4" Hex Head Bin Bolts and
5/16" Hex Nuts.)
Varies
5 S-396 Varies
6 S-7927
Hopper Brace to Leg (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
6 or 9
6 S-456 6 or 9
7 S-4303 Hopper Collar to Hopper Panel (Use 5/16" x 3/4" Truss Head Bin Bolts and
5/16" Flanged Whiz Nuts.) (Bolt Heads to Inside of Tank.) (16" Shown) 18 or 36
7 S-3611 18 or 36
8 S-4303 Vertical Hopper Seams (Use 5/16" x 3/4" Truss Head Bin Bolts and 5/16"
Flanged Whiz Nuts.) (Bolt Heads to Inside of Tank.) 225
8 S-3611 225
9 S-7927
Cross Tie Brace to Leg (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
12 or 18
9 S-456 12 or 18
10 S-7927 Cross Tie Brace to Cross Tie Brace (Use 3/8" x 1" Flange Head Bolts and
3/8" Hex Nuts.) 6 or 9
10 S-456 6 or 9
11 S-277 Hopper Panels to Sidewall Sheet (Use 5/16" x 1-1/4" Hex Head Bin Bolts and
5/16" Hex Nuts.) (Bolt Head to Inside at Leg to Hopper to Sidewall
Connection Only.) 108
11 S-396 108
12 S-275 Leg to Sidewall Sheet (Use 5/16" x 3/4" Hex Head Bin Bolts and 5/16" Hex
Nuts.) (Bolt Heads to Inside of Tank.) 126 or 189
12 S-396 126 or 189