Grain Systems Tanks PNEG-1912 - Manual (Page 46)

9. Safety Cage
46 PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series
48" Safety Cage
Attach the vertical support pieces to the existing hoop halves above using 5/16" x 3/4" bolts and nuts with
the head of the bolt to the inside of the safety cage. Fasten two (2) hoop halves together and bolt to other
end of vertical supports. Attach cage hoop bracket to ladder. See cage hoop bracket detail
on Page 44 .
Once cage hoop brackets are installed, attach cage hoop halves and tighten bolts. Repeat installation for
each safety cage required.
Figure 9G