Legs and leg bracing, Chapter 12 legs and leg bracing, Tank legs and leg braces – Grain Systems Tanks PNEG-1912 User Manual
Page 59: Leg size chart
PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series
59
12. Legs and Leg Bracing
Tank Legs and Leg Braces
Leg Size Chart
When installing legs to sidewall, reverse the normal insertion procedure for bolts. Place hex head and
neoprene washer to inside of sidewall, leaving threaded portion of bolt protruding outward. This provides
for a weather-tight seal at the leg attachment location.
for leg attachment to sidewall
sheet details.
Put all legs on, but DO NOT TIGHTEN until all braces are in place. Be sure to put leg braces on
properly.
Figure 12A
Tank Size
Hopper
# of Rings
Length
Leg Coverage
6' Diameter Tank
60°
5-8 Rings
133"
1-3/4 Rings (56")
7' Diameter Tank
67°
7-8 Rings
165-1/2"
1-3/4 Rings (56")
7' Diameter Tank
45°
7-8 Rings
120-3/4"
1-3/4 Rings (56")
9' Diameter Tank
60°
7-11 Rings
165-1/2"
1-3/4 Rings (56")
9' Diameter Tank
45°
7-11 Rings
132-3/4"
1-3/4 Rings (56")
Failure to follow instructions may cause damage or failure of the equipment.
WARNING