Eave adjustable braces – Grain Systems Tanks PNEG-1912 User Manual
Page 42
Advertising
![background image](/manuals/277750/42/background.png)
9. Safety Cage
42
PNEG-1912 6', 7' and 9' Tall BFT Series and GHT Series
Eave Adjustable Braces
The adjustable braces must be attached at this time. A large diameter tube and two (2) smaller tubes are
used to make up one adjustable brace. Slip the smaller tubes inside the larger tubes and attach one
smaller tube to the top of the ladder extension rail. Adjust the other smaller tube so the bottom of the
flattened tube reaches the roof panel. Field drill four (4) 5/16" holes through both large and small tubes
and bolt together using 1/4" x 1-1/2" bolts and nuts. This prevents the adjustable braces from slipping.
Figure 9B
Advertising