Grain Systems Tanks PNEG-4135 - Manual (Page 112)

Chapter 7: Roof Assembly
Figure 7-26 Assembling the short center collar channels to the long center collar channel
C 1/2 x 1-3/4 in. flange bolt (S-10252) I Long center collar channel (CTR-0278)
E 1/2 in. flange nut (S-10253) J Short center collar channel (CTR-0280)
G 1/2 x 1-3/4 in. flange bolt (S-10252) K Short channel clip (CTR-0329)
H 1/2 in. flange nut (S-10253)
22.Align the two center cap plates (L and M) onto the center collar channel assembly, ensuring the
center cap plates are parallel to the long center collar channel (I).
23.Apply a strip of tube caulk (N) along the inside edge row of holes as shown.
24.Install a splice plate (O) over the fresh strip of caulk (N), and install twelve bolts (P) and nuts (A)
securing the cap plates (L and M) and the splice plate (O)
112 Pneg-4135 135 Ft Diameter 40-Series Bin