Grain Systems Tanks PNEG-4135 - Manual (Page 125)

Chapter 7: Roof Assembly
Figure 7-37 Exploded view of A-frame to center collar
A A-frame rafter assembly C 1/2 x 1-3/4 in. flange bolt (S-10252)
B Center collar (CTR-0347) D 1/2 in. flange nut (S-10253)
Attaching the A-Frame to the Eave Bracket
Assemble the lower portion of the A-frame rafters to the sidewalls.
1. Install flange bolts (B) and flange nuts (D), securing one side on the A-frame assembly.
2. Repeat this procedure for the other side of the A-frame.
3. Tighten to the recommended torque specifications. See Bolt Torque Specifications, page 26 .
Pneg-4135 135 Ft Diameter 40-Series Bin 125