Grain Systems Tanks PNEG-4135 - Manual (Page 174)

Chapter 8: Accessories
Figure 8-22 Vertical line location of discharge chute
A Column of bolt holes C Measurement, approximately 11 in. (27.94 cm)
B Baffle chute D Vertical center line
3. Measure approximately 4 in. (16.16 cm) upward from the sidewall horizontal seam (E), and place a
mark or scribe, creating a horizontal center line (G).
4. Place another mark or scribe where the vertical center line (D) and the horizontal center line (G)
meet, creating the center of the discharge chute location (F).
5. Remove the baffle chute from the sidewall panel.
174 Pneg-4135 135 Ft Diameter 40-Series Bin