Grain Systems Tanks PNEG-4135 - Manual (Page 32)

Chapter 3: Hardware Requirements
Bolt S-10165
An S–10165 is a 3/8 x 2 in. JS bolt that is pre-assembled with a sealing washer.
Bolt (S-10165) is used in the following locations:
• Use in bins that are 105 ft in diameter, 28 rings and taller and in
135 ft diameter bins.
• Use in overlapping seams for 8 gauge to 9 gauge quad lami-
nated sidewall sheets.
• Use to connect 6 gauge quad laminated sheets to one another.
• Use to attach stiffeners to 6 gauge quad laminated sidewall
sheets.
• The color of the bucket lid is light blue.
A 2.350 in. (5.97 cm) C Grade 8
B 2.000 in. (5.08 cm) D Grade 8.2
Bolt S-9389
An S–9389 is a 7/16 x 2 in. JS bolt that is with a pre-assembled sealing washer.
Bolt (S-9389) is used in the following locations:
• Use in horizontal seams of laminated sidewall sheets that are six
gauge and have a figurate pattern.
NOTE: The standard 0.4375 in. hex nut (S-9281) will be used in
conjunction with this bolt.
• The color of the bucket lid is light purple.
A 2.395 in. (6.08 cm) C Grade 8
B 2.000 in. (5.08 cm) D Grade 8.2
Bolt S-10134
An S–10134 is a 7/16 x 2 1/2 in. JS bolt that is pre-assembled with a sealing washer.
Bolt (S-10134) is used in the following locations:
• Use in bins 105 ft, 28 rings and taller and 135 ft diameter bins.
• Use in vertical seams of laminated sidewall sheets that are nine
gauge and thicker. A special 7/16 in. nut, S-8479 is required to
be used in conjunction with this bolt.
• Lid color of bucket is dark green.
A 2.895 in. (7.35 cm) C Grade 8
B 2.500 in. (6.35 cm) D Grade 8.2
32 Pneg-4135 135 Ft Diameter 40-Series Bin