Installing drive shaft, See chart), Assembly & installation – Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1435 User Manual
Page 22
Advertising
![background image](/manuals/277847/22/background.png)
22
PNEG-1435 6", 8" & 10" Utility & Bulk Augers
4. ASSEMBLY & INSTALLATION
Installing Drive Shaft
1. Insert the Drive Shaft into the opposite end of flight with keyway facing outward. Align the
holes in the shaft and secure with Grade 8 bolts and stover nuts
and
.
Figure 4K
Flight Hardware
6"
3/8" x 2" - 16 Grade 8 Hex Bolts
8"
7/16" x 3" - 14 Grade 8 Hex Bolts
10"
1/2" x 3-1/2" - 13 Grade 8 Hex Bolts
Bolts
Key Way
Drive Shaft
Stover Nut
Advertising