Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1435 - Manual (Page 23)

PNEG-1435 6", 8" & 10" Utility & Bulk Augers 23
4. ASSEMBLY & INSTALLATION
Mounting Bearing to Bearing Plate
1. Align bolt holes on Bearing Flange with bolt holes on Bearing Plate.
2. Secure Bearing to Bearing plate using appropriate bolts, lock washers, and nuts
(See Chart) and (Figure 4L) .
Figure 4L
Bearing Bolts
6" 7/16'' x 1-1/2'' - 14 Hex Bolts
8" & 10'' 1/2'' x 1-1/2'' - 13 Hex Bolts
[ (See Chart) for bolt sizes]
Bolts
Bearing Plate
Nut Bearing Flange
Lock Washer