Grain Systems Unload Augers PNEG-1421 - Manual (Page 12)

3. Safety Decals
12 PNEG-1421 Direct Gear Drive Bin Sweep Auger (with Roller Wells)
Check components shown below to ensure that the safety decals are in place and in good condition.
If a decal cannot be easily read for any reason or has been painted over, replace it immediately. Contact
your dealer or the manufacturer to order a replacement decal free of charge.
DANGER Sign No. DC-1395 was supplied with your bin unloading equipment. This safety sign should be
applied to the side of the bin near the bin opening, so it will be viewed by people entering into the bin
storage building. Do not cover any safety signs or any other signs that are already there.
NOTE: Please remember, safety signs provide important safety information for people working near bin
unloading equipment that is in operation.
DC-1384
DC-1395
Located on the back of the
flight shield.
KEEP OUT OF BIN WHILE SWEEP IS IN OPERATION
RAPIDLY TRAVELING SWEEP AUGER
FAILURE TO HEED WILL RESULT IN
SERIOUS INJURY OR DEATH
DC-1384