Install the flighting shield – Grain Systems Unload Augers PNEG-1421 User Manual
Page 33
Advertising
4. Installation
PNEG-1421 Direct Gear Drive Bin Sweep Auger (with Roller Wells)
33
Install the Flighting Shield
1. Install the first shield to the shield mounting bracket. Secure using two (2) 3/8" x 1-1/4" bolts,
flat washers and lock nuts.
2. Fasten the shield bracket to the pivot bracket on the gearbox using one 1/2" x 1/2" shoulder bolt
and lock nut.
Figure 4AF
3. Install the first and second flighting shield (when applicable) to the hanger bracket using two (2)
3/8" x 3" carriage bolts, flat washers and lock nuts.
Figure 4AG
Advertising