Install the sweep flighting – Grain Systems Unload Augers PNEG-1421 User Manual
Page 29
Advertising
4. Installation
PNEG-1421 Direct Gear Drive Bin Sweep Auger (with Roller Wells)
29
Install the Sweep Flighting
1. Assemble the U-joint.
a. Insert the stub into the U-joint.
b. Secure the U-joint using a 5/16" x 2" roll pin. Drive the pin in with a hammer.
Figure 4Y
2. Attach the U-joint.
a. Slide the U-joint onto the top gearbox output shaft.
b. Secure the U-joint using a 5/16" x 2" roll pin.
Figure 4Z
Advertising