GE Industrial Solutions Millennium II Controller J85501P-1 - Manual (Page 111)

Basic Installation and User’s Guide for the Millennium II Controller
Issue 3 January 2008 111
3. Select Clear Events, and press Enter.
4. Press Enter again to clear the latched events, or Escape to return to the menus.
NOTE: If the Alarm is a Latched Event and does not retire after performing this
operation, the alarm condition most likely still exists.
Uninstall Devices
This feature is used to logically remove serial bus devices that have been physically
removed and an alarm generated to indicate this removal. Rectifiers, converters, and
BICs are the most common devices that require this feature.
Step Action
NOTE! This feature uninstalls ALL devices that have been physically removed.
1.
From the Default Screen, press the Menu button for the Main Menu.
2. Using the Up/Down Arrows, Scroll to Control/Operations and press Enter.
3. Select Uninstall Devices, and press Enter.
4. Press Enter again to Uninstall Devices, or Escape to return to the menus.