GE Industrial Solutions Millennium II Controller J85501P-1 - Manual (Page 44)

Basic Installation and User’s Guide for the Millennium II Controller
Issue 3 January 2008 44
Table 4-K: Rectifier Alarm Defaults
Symbol Default Designation Default
Severity Default LED Default
Relay
ACF AC Fail Minor AC ACF
CLM Rectifier Current Limit RO None None
ERD Excess Rectifier Drain Minor RECT None
ETS External Transfer Shutdown Minor RECT None
HPA Half Power Minor RECT None
LCA Low Current Alarm Minor RECT None
LSF Load Share Fuse Minor RECT None
MACF Multiple AC Fail Major AC ACF
MAN Manual Off Minor RECT None
MFA Multiple Rectifier Fail Major RECT RFA
MMAN Multiple MAN Alarm Major RECT None
PHA Phase Or Low Output Minor AC None
RIC Rectifier Incomplete Config Warning None None
RFA Rectifier Fail Minor RECT RFA
Default Display
The default display shown in figure 4-8
provides basic system status. The controller
returns to this display after approximately three minutes after the last time a key is
pressed.
Figure 4-8: Millennium II Controller Default Display
The first line shows:
# of Alarms # of Warnings Date Time
The larger text in the middle of the screen shows:
Plant Voltage Plant Load (Current)