GE Industrial Solutions Millennium II Controller J85501P-1 - Manual (Page 22)

Basic Installation and User’s Guide for the Millennium II Controller
Issue 3 January 2008 22
Safety
Action Verified
Always consider personal safety before beginning any procedure. Review
the Safety section.
Be aware of the presence of unfused battery potential in the vicinity of
the controller.
Use only insulated tools.
Make sure the system is properly grounded per the National Electrical
Code and local building codes.
Remove all metal jewelry before beginning the installation.
Installation Materials
Item Verified
Wire cutters and strippers
18 to 22 AWG wire
Jewelers screwdriver (Flat and Phillips)
Small needle nose pliers
Digital meter, +/- 0.02%
Screw Drivers (flat-blade and Phillips)
ESD wrist strap
Wire-wrap tool or Amp alarm punch-down tool
Figure 4-1: Millennium II