GE Industrial Solutions Millennium II Controller J85501P-1 - Manual (Page 39)

Basic Installation and User’s Guide for the Millennium II Controller
Issue 3 January 2008 39
Controller Defaults
Dip Switch Settings
The Millennium has 8 dip switch positions (SW202) that may be changed. SW202 is
located on the MCR1 board, above the MCR2 board. (See figure 4-7)
Figure 4-7: Millennium II Controller Dip Switches
Table 4-G: Millennium II Controller Dip Switch Settings
Switch
Position Default Description Closed
(1) Open
(0)
SW202-8 1 Front Panel Configuration ENABLED DISABLED
SW202-7 0 Modem/Aux/Local/Gateway/USB/
IRDA Port Setting Configuration
(Remote Access) ENABLED DISABLED
SW202-6 0 Enhanced Security Mode (See
table 4-H, for features affected ENABLED DISABLED
SW202-5 1 Auxiliary Port Configuration RS-232 RS-485
SW202-4 1 Remote Rectifier in Standby ENABLED DISABLED
SW202-3 0 Boost Mode ENABLED DISABLED
SW202-2 1 Reserved for Future Use ENABLED DISABLED
SW202-1 1 Reserved for Future Use ENABLED DISABLED