Asus RX3041H - Manual (Page 107)

RX3041H User’s Manual Chapter 11. System Management
93
11
System Management
This chapter describes the following administrative tasks that you can perform using the Configuration
Manager:
Configure system services
Modify password and add management hosts
Modify system specific information
Modify system date and time
Reset, backup and restore system configuration
Update firmware
Log out of the Configuration Manager
You can access these tasks from the System Management menu.
11.1 Configure System Services
As shown in Figure 11.1, you can use the System Services configuration page to
enable or disable services supported by the router. All services, except DDNS, RIP,
SNTP and uPnP, are all enabled at the factory. To disable or enable individual
service, follow the steps below:
1. Open the System Services configuration page by clicking the System
Management Î System Services menu.
2. Click on the “Enable” or “Disable” radio button for individual service to
enable or disable the desired service.
Figure 11.1. System Services Configuration
3. Click on button to save the settings.
11.2 Change the Login Password and Management Station IP Addresses
11.2.1 Change the Login Password
The first time you log into the Configuration Manager, you use the default username and password: admin and
admin. The system allows two types of users – administrator (username: admin) and guest (username: guest).