Asus RX3041H - Manual (Page 94)

Chapter 9. Configuring Firewall/NAT Settings RX3041H User’s Manual
80
4. Click on the button to save the new settings. The new settings for this pool will then be
displayed in the NAT Pool List table.
9.8.3.4 Delete a NAT Pool
To delete a NAT Pool, click on the icon of the NAT pool to be deleted or follow the instruction below:
1. Open the NAT Pool configuration page by clicking the Firewall Î Policy List Î NAT Pool
menu.
2. Click on the icon of the NAT pool to be deleted in the NAT Pool List table or select the NAT
pool from the NAT Pool drop-down list.
3. Click on the button to delete this NAT pool.
9.8.3.5 NAT Pool Example
Figure 9.31 shows the network diagram for this NAT pool example.
10.64.2.0/24
ISR
Static NAT Pool
LAN Port
192.168.1.1
WAN Port
10.64.2.254
192.168.1.11
10.64.2.1
10.64.2.2
10.64.2.3
192.168.1.12 192.168.1.13
Figure 9.31. Network Diagram for NAT Pool Example
1. Create a NAT pool for static NAT – see Figure 9.32.
Figure 9.32. NAT Pool Example – Create a Static NAT Pool