Modify an application filter, Figure 9.25. modify an application filter – Asus RX3041H User Manual
Page 88
Chapter 9. Configuring Firewall/NAT Settings
RX3041H User’s Manual
74
Figure 9.24. HTTP Filter Example – Associate HTTP Filter Rule to an ACL Rule
9.8.1.3
Modify an Application Filter
To modify an IP Pool, follow the instructions below:
1. Open the Application Filer configuration page by clicking the Firewall
Î Policy List Î Application Filter menu.
2. Select the application filter to modify. Click on the
icon of the
application filter to be modified in the Application Filter List table or
select the filter type from the Filter Type drop-down list and then s
the filter rule from the Filter Rule drop-down.
elect
umber,
3. Make desired changes to any or all of the following fields: Port n
logging option, etc.
Filter Type drop-down list
Filter Rule drop-
down list
HTTP filter drop-down list
Figure 9.25. Modify an Application Filter