Asus RX3041H - Manual (Page 109)

RX3041H User’s Manual Chapter 11. System Management
95
Table 11.1. Management Station Configuration Parameters
Field Description
ID
Add New Click on this option to add a new management group.
Number Select a management group from the drop-down list to modify its
configuration.
Address Type
This option allows you to select how you want to specify the IP addresses for the management
station group. Three options are available: IP address, range and subnet.
IP Address This option allows you to specify an IP address for a management station.
Address Specify the an appropriate IP address
Range This option allows you to specify a range of IP addresses for the
management station group. The following fields become available for entry
when this option is selected:
Begin Enter the starting IP address of the range
End Enter the ending IP address of the range
Subnet This option allows you to specify all the computers that are connected in an
IP subnet to become the management station group. When this option is
selected, the following fields become available for entry:
Network Address Enter the appropriate IP address.
Subnet Mask Enter the corresponding subnet mask.
11.2.2.2 Add a Management Station Group
To add a management station group, follow the instructions below:
1. Open the Password configuration page by clicking the System
Management Î Password menu.
2. Select “Add New” from the “ID” drop-down list.
3. Select “Address Type” from among the three options – IP Address,
Range and Subnet and then enter the desired IP address information.
Management Station ID drop-down list
Figure 11.3. Management Station Configuration
4. Click on the button to add the new management station group. You will see the newly
added management station displayed in the management station summary in the same
configuration page.