Asus RX3041H - Manual (Page 79)

RX3041H User’s Manual Chapter 9. Configuring Firewall/NAT Settings
65
9.7.2.2 Add a Service
To add a service, follow the instructions below:
1. Open the Service List configuration page by clicking the Firewall Î
Advanced Î Service.
2. Select “Add New” from the service drop-down list.
3. Enter a desired name, preferably a meaningful name that signifies the
nature of the service, in the “Service Name” field. Note that only
alphanumeric characters are allowed in a name.
4. Make changes to any or all of the following fields: public port and protocol. Please see Table 9.4
for explanation of these fields.
Figure 9.14. Service List Configuration
5. Click on the button to create the new service. The new service will then be displayed in
the service list table at the bottom half of the Service configuration page.
Edit icon
Service drop-down list
Figure 9.15. Service List
9.7.2.3 Modify a Service
To modify a service, follow the instructions below:
1. Open the Service List configuration page by clicking the Firewall Î Advanced Î Service.
2. Select the service from the service drop-down list or click on the icon of the service to be
modified in the service list table.
3. Make desired changes to any or all of the following fields: service name, public port and protocol.
Please see Table 9.4 for explanation of these fields.