Asus RX3041H - Manual (Page 62)

Chapter 8. Configuring DDNS RX3041H User’s Manual
48
8.3 Configuring HTTP DDNS Client
Follow these instructions to configure the HTTP DDNS:
1. First, you should have already registered a domain name to the DDNS
service provider. If you have not done so, please visit www.dns-tokyo.jp or
www.dyndns.org for more details.
2. Make sure that you have a host name configured for the RX3041H;
otherwise, open the System Identity configuration page to configure one.
Please refer to the section 11.3 “Configure System Identity” for more details.
3. Open the DDNS configuration page by clicking on the DDNS menu.
4. In the DDNS configuration page, select “Enable” for the DDNS State and “HTTP DDNS” for the
DDNS Type.
Figure 8.4. HTTP DDNS Configuration
5. Enter the domain name in the DNS Zone Name field.
6. Select a DDNS service from the DDNS Service drop-down list.
7. Enter the username and password provided by your DDNS service providers.
8. Click on button to send a DNS update request to your DDNS service provider. Note that
DNS update request will also be sent to your DDNS Service provider automatically whenever the
WAN port status is changed.
8.4 Configuring Local Host Table
This is the local host table used by the router to map the host name to its IP address. This table may be used
for the servers deployed inside your LAN. For example, you may create a host entry in this table for your