Asus RX3041H - Manual (Page 99)

RX3041H User’s Manual Chapter 10. Configuring Remote Access
85
10
Configuring Remote Access
10.1 Remote Access
The RX3041H firewall allows telecommuters to securely access their corporate network using the Remote
Access mechanism based on the notions of groups, users and access policies. Each group is associated with
a set of access policies that are activated when a user belonging to that group logs in. The RX3041H
maintains details about the access policies defined for the remote access groups. These access lists define
the resources the remote users are allowed to access and the inactivity time-out applicable to all the users in
the group.
When a user belonging to a group logs in via the Internet or through the local network, the RX3041H Firewall
activates the policies associated with the group and creates dynamic policies associated with the user. These
dynamic policies are referred to for every connection from the user. They are deleted once the user logs out of
the RX3041H or in case of inactivity time-out.
A typical configuration for remote access involves the following actions:
Add/modify/delete a new user group and user information (including user name, password and etc) to
the group.
Add/modify/delete group access policies.
10.2 Manage User Groups and Users
The Remote Access option allows you to configure users and groups.
10.2.1 User Group Configuration Parameters
Table 10.1 describes the configuration parameters available for remote access user group and users.
Table 10.1. User Group Configuration Parameters
Field Description
User Group
User Group Drop-
down list
Select “Add New User Group” to add a new group or select an existing
group from the drop-down list.
User Group Name Enter a unique User group name for the group that you would like to add.
Group State Click on the Enable or Disable radio button to enable or disable the group.
Disabling the group will force all the users to be disconnected in that group
who have already logged in. Further login of all the users in that group will
be disabled. Enabling the group will allow all the enabled-users in the group
to log in.
Inactivity Timeout Enter the timeout period, which is used to delete the User related sessions
when there is no traffic across this connection.
User
User Drop-down list Select “Add New User” to add a new user or select an existing user from the
drop-down list.
User Name Enter a unique User name for the user that you would like to add.