Asus RX3041H - Manual (Page 86)

Chapter 9. Configuring Firewall/NAT Settings RX3041H User’s Manual
72
Figure 9.20 FTP Filter Example – Firewall Configuration Assistant
8. Select the desired FTP command from the FTP Command drop-down list and then click on the
button. The selected FTP command will be added into the selected Deny FTP
Commands field.
Figure 9.21 FTP Filter Example – Add an FTP Filter to Deny FTP Delete Command
9. Repeat step 8 if more commands are to be added; otherwise, proceed to the next step.
10. Click on button to create this FTP application filter rule.
FTP Command drop-down list
FTP filter drop-down list
Figure 9.22. FTP Filter Example – Associate FTP Filter Rule to an ACL Rule
11. Associate the newly added FTP application filter rule to a firewall ACL rule (inbound, outbound or
group ACL) by selecting a FTP filter from the FTP filter drop-down list (see Figure 9.22) and then
click on or button to save the settings.