Asus RX3041H - Manual (Page 42)

Chapter 5. Configuring LAN Settings RX3041H User’s Manual
28
Figure 5.2. DHCP Configuration
3. Click to save the DHCP server configurations.
5.2.2.3 Viewing Existing IP Address Lease
When the RX3041H functions as a DHCP server for your LAN, it keeps a record of all the addresses it has
leased to your computers. To view the existing lease table, just open the DHCP Server configuration page by
clicking the LAN
Î DHCP menu. A lease table similar to that shown in Figure 5.3 is displayed at the bottom
half of the DHCP configuration page.
Figure 5.3. Sample DHCP Lease Table
The DHCP Server Lease Table shows all the IP addresses that are currently provided to the LAN devices.
Table 5.3 describes the information for each of the parameters shown in the DHCP lease table.
Table 5.3. DHCP Address Assignment Parameters
Field Description
MAC Address A hardware ID of the device that leases an IP address from the DHCP server.
Assigned IP Address The address that has been leased from the pool.
IP Address Expired
on The time when the leased address is to be terminated.
5.2.3 Fixed DHCP Lease
Fixed DHCP lease is used in situation when a fixed IP address is desired for a host that gets IP from the
DHCP server. First, you should configure your PCs to accept DHCP information assigned by a DHCP server:
5.2.3.1 Fixed DHCP Lease Configuration Parameters
Table 5.4 describes the configuration parameters available for fixed DHCP lease.