Asus RX3041H - Manual (Page 18)

Chapter 2. Getting to Know the RX3041H RX3041H User’s Manual
4
2.3 Rear Panel
The rear panel contains the ports for the unit's data and power connections.
Figure 2.2. Rear Panel Connections
Table 2.2. Rear Panel Labels and LEDs
Label Function
POWER
Power Input Jack
Connects to the supplied AC adapter
Reset
Reset Button
1. Reboots
the device
2. Used for resetting the system configuration to the factory
settings. Please refer to the section 11.6.1.2 “ Reset to Factory
Settings Using Reset Button ” for further details.
CONSOLE
Console Port
For ASUSTeK internal use only.
WAN
WAN Port
Connects to your WAN device, such as an ADSL or a cable
modem.
P1 – P4
LAN Ports
Connects to your PC's Ethernet port, or to the uplink port on the
hub or the switch
2.4 Major Features
2.4.1 Firewall and NAT Features
The firewall implemented in your router provides the following features to protect your network from being
attacked and to prevent your network from being used as the springboard for attacks.
Address Sharing and Management
Packet Filtering
Stateful Packet Inspection
Defense against Denial of Service Attacks
Application Content Filtering
Log and Alert
Remote Access