Asus RX3041H - Manual (Page 26)

Chapter 3. Quick Start Guide RX3041H User’s Manual
12
7. If prompted, click <OK> button to restart your computer with the new settings.
Next, configure the PCs to accept IP addresses assigned by the RX3041H:
8. In the Control Panel, double-click the Network and Dial-up Connections icon.
9. In Network and Dial-up Connections window, right-click the Local Area Connection icon, and
then select Properties.
10. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then
click <Properties> button.
11. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Obtain an
IP address automatically. Also click the radio button labeled Obtain DNS server address
automatically.
12. Click <OK> button twice to confirm and save your changes, and then close the Control Panel.
3.2.4 Windows® 95, 98, and Me PCs
1. In the Windows task bar, click the <Start> button, point to Settings, and then click Control Panel.
2. Double-click the Network icon.
In the Network dialog box, look for an entry started w/ “TCP/IP ->” and the name of your network
adapter, and then click <Properties> button. You may have to scroll down the list to find this entry.
If the list includes such an entry, then the TCP/IP protocol has already been enabled. Skip to step 8.
3. If Internet Protocol (TCP/IP) does not display as an installed component, click <Add> button.
4. In the Select Network Component Type dialog box, select Protocol, and then click <Add> button.
5. Select Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols list,
box and then click <OK> button.
You may be prompted to install files from your Windows 95, 98 or Me installation CD or other media.
Follow the instructions to install the files.
6. If prompted, click <OK> button to restart your computer with the new settings.
Next, configure the PCs to accept IP information assigned by the RX3041H:
7. In the Control Panel, double-click the Network icon.
8. In the Network dialog box, select an entry started with “TCP/IP ->” and the name of your network
adapter, and then click <Properties> button.
9. In the TCP/IP Properties dialog box, click the radio button labeled Obtain an IP address
automatically.
10. In the TCP/IP Properties dialog box, click the “Default Gateway” tab. Enter 192.168.1.1 (the
default LAN port IP address of the RX3041H) in the “New gateway” address field and click
<Add> button to add the default gateway entry.
11. Click <OK> button twice to confirm and save your changes, and then close the Control Panel.
12. If prompted to restart your computer, click <OK> button to do so with the new settings.
3.2.5 Windows® NT 4.0 workstations:
First, check for the IP protocol and, if necessary, install it:
1. In the Windows NT task bar, click the <Start> button, point to Settings, and then click Control
Panel.