Asus GigaX2048 - Manual (Page 108)

GigaX Series L2 Managed Switch User’s Guide
108
5.2 Login and Logout
By typing “login” to enter the CLI mode, you have to give a valid user name
and password. As the first time login, you can enter “admin” as the user
name and bypass the password. For security reason, please change the
user name and password after login. Once you forget the use name and
password, you may contact ASUS support team or erase the whole
configuration file in the Boot ROM Command mode. If you take the
second choice, the whole system configuration is lost at the same time.
That is, you have to configure the switch again.
You type “logout” to leave the CLI mode safely. This action allows you to
secure the CLI mode. The next user has to do login again with authorized
user name and password.
5.3 CLI Commands
The switch provides CLI commands for all managed functions. The
command uses are listed in the categories as the WEB management
interface. This way, you can follow the instructions and set up the switch
correctly as easily as using WEB interface to configure the switch.
Always use “?” to get the available commands list and help.
Always use “/” to get back to the root directory.
Always use “..” to get back to parent directory.
Type the command only to get help for the command
5.3.1 System Commands
[System Name]
Displays the given name of the switch. This is an RFC-1213 defined MIB
object in System Group, and provides administrative information on the
managed node.
CLI command: sys info name <system name description>
If you put a name in the name description field, the switch system name
changes to the new one.