Asus GigaX2048 - Manual (Page 109)

GigaX Series L2 Managed Switch User Guide
[System Contact]
Displays the detail information of contact about the switch. This is an
RFC-1213 defined MIB object in System Group, and provides contact
information on the managed node.
CLI command: sys info contact <system contact description>
If you put the contact description in the contact description field, the switch
contact will change to the new one.
[System Location]
Displays the physical location of the switch. This is an RFC-1213 defined
MIB object in System Group, and provides the location information on the
managed node.
CLI command: sys info location <system location description>
Type in the location description in the location description field to change
the location.
Figure 69. SYS commands
[VLAN ID]
Displays the VLAN ID for the switch. It is
necessary to be within the same VLAN for
management usages.