Asus GigaX2048 - Manual (Page 120)

GigaX Series L2 Managed Switch User’s Guide
120
CLI command: l2 dhcpsnoop disable <vlan id list>
[Remove VLAN]
Allows user to completely destroy an existing VLAN.
CLI command: l2 vlan delete <vlan id>
[Retrieve]
Restores the previous saved settings from configuration file.
CLI command: l2 vlan retrieve
[PVID]
Sets the default VLAN for a port by giving a VLAN ID and its associated
port member list.
CLI command: l2 port vlan <vlan id, 4095 to disable the port-based
vlan> <port list> [CoS Value]
Sets the Class of Service for a port by assigning it a priority (with range of
0-7) criteria value.
CLI command: l2 port priority <CoS> <port list>
[Retrieve]
Restores the previous saved settings from configuration file.
CLI command: l2 port retrieve
[Priority] [CoS Queue]
Allows user to map the CoS priority (with range of 0-7) for a buffer queue
(total of 4, with queue ID of 1-4).
CLI command: l2 cos map <queue id (1-4)> <cos (0-7)>
[Retrieve]
Restores the previous saved settings from configuration file.
CLI command: l2 cos retrieve