Authentication method, Quiet period, Retransmission time – Asus GigaX2048 User Manual
Page 135: Max reauthentication attempts, Multi-host, Authentication control
GigaX Series L2 Managed Switch User Guide
CLI command: security dot1x bridge reauthtime <reauthentication
time (1-4294967295 sec)>
[Authentication Method]
Allows user to set up the authentication method (RADIUS or Local database).
CLI command: security dot1x bridge authmeth <type (1:local
2:radius)>
[Quiet Period]
Allows user to set up the quiet period.
CLI command: security dot1x bridge quietperiod <quiet period
(1-65535 sec)>
[Retransmission Time]
Allows user to set up the retransmission time.
CLI command: security dot1x bridge retxtime <retransmission time
(1-65535 sec)>
[Max Reauthentication Attempts]
Allows user to set up the max number of the reauthentication attemps.
CLI command: security dot1x bridge reauthmax <max
reauthentication attemps (1-10)>
[Multi-host]
Allows user to enable or disable Multi-host on some specific ports.
CLI command: security dot1x port multihost <enable/disable><port
list/*>
[Authentication Control]
Allows user to set up the authentication control of some specific ports.
CLI command: security dot1x port authctrl <type (1: force_authorized
2:force_unauthorized 3: auto)><port list/*>
[Guest VLAN]