Asus GigaX2048 - Manual (Page 87)

GigaX Series L2 Managed Switch User Guide
• CosOverride: disable/enable CoS Override on the port. Cos
Override only can be enabled when Trust State is 'No' trust. CoS
Override will override the previously configured trust state and apply
the default port CoS value to all incoming packets. If a port was
previously set to trust DSCP, this command overrides the previously
configured trust state, and all the incoming CoS values are assigned
to default port CoS value. If an incoming packet is tagged, the CoS
value of the packet is modified with the default port CoS.
Select the corresponding port number and configure the port setting, then
click on the button. The field you changed will update the content
of the display window. Click on to save the configuration. Click on
to refresh the settings to current value. To make the configuration
effective, please go to "Save Configuration" page, then click on .
Figure 55. Trust State