Lacp port priority, For gigax 2048, Mirror] [mirror 1/mirror 2 – Asus GigaX2048 User Manual
Page 115: For gigax 2024
GigaX Series L2 Managed Switch User Guide
[LACP Port Priority]
User can assign the port priority for running LACP.
CLI command: l2 trunk lacp syspri <priority (1-65535)>
Restores the previous saved settings of trunking from configuration file.
CLI command: l2 trunk retrieve
**For GigaX 2048
[Mirror] [Mirror 1/Mirror 2]
[Mirror Mode] [Enable/Disable]
[Monitor Port] [port number] Displays the mirroring settings of the
switch. User can create a maximum of two mirroring ports on the switch.
One is associated to a SoC., which means mirror ID 1 is dedicated to
SoC 0, and mirror ID 2 is dedicated to SoC 1. Therefore, only port
number 1-24 can be assigned to mirror ID 1 as monitor port, ingress
port(s), or egress port (2). Only ports 25-48 can be assigned to mirror ID
2 as mirroring ports.
CLI command: l2 mirror create <mirror id (1 or 2)> <monitor
port no> <enable/disable>
CLI command: l2 mirror ingress <mirror id (1 or 2)> <port list>
CLI command: l2 mirror egress <mirror id (1 or 2)> <port list>
CLI command: l2 mirror remove <mirror id (1 or 2)>
<ingress/egress> <port list>
**For GigaX 2024
[Mirror Mode]
[Enable/Disable]
[Monitor Port] [port number] Displays the mirroring settings of the
switch.
CLI command: l2 mirror create <monitor port no>
<enable/disable>
CLI command: l2 mirror ingress <port list>